欢迎光临海关联盟cutr认证俄罗斯测试认证中心TEST CERT LTD
gost@gost.org.cn                  021-36411293

俄罗斯测试认证中心 ООО "ТЕСТ СЕРТ"

海关联盟授权代码:RA.RU.11НА27

上海卡卢加机电设备检测中心/EAC认证


新闻中心

CUTR Scheme CUTR Certification Schemes CUTR Declaration schemes cutr EAC Certification scheme 1C , 2C , 3C , 4C , 5C, 6C, 7C, 8C, 9C , 1d , 2d , 3d , 4d , 5d
来源: | 作者:pmt93305e | 发布时间: 2019-04-28 | 253 次浏览 | 分享到:
CUTR Scheme,CUTR Certification Schemes,CUTR Declaration schemes,cutr EAC Certification scheme 1C , 2C , 3C , 4C , 5C, 6C, 7C, 8C, 9C , 1d , 2d , 3d , 4d , 5d
CUTR Scheme
 CUTR Certification Schemes
1C Certification Scheme
Used for certification of products and equipment produced in series. With this scheme, tests of the control sample are conducted, as well as analysis of the conditions of production.

2C Certification Scheme
This scheme is recommended for goods that are regularly imported into the country and mass-produced by Russian manufacturers. Not recommended for foreign goods that are regularly imported into the country in large quantities. Suggests tests

3C Certification Scheme
It is optimal for products whose quality remains stable regardless of the batch, date of issue and other indicators of the product for a long time. A sample is taken from a specific production batch. Analysis of the production of the manufacturer is not carried out.

4C Certification Scheme
This certification scheme is recommended to be used when inspection control of a product (product) is expedient and inexpensive. In such a scheme, a certificate is issued for a specific unit of goods and a specific product is tested.

5C Certification Scheme
This scheme involves a set of verification measures, including a detailed analysis of production conditions. This scheme is used by organs for mass-produced products if it is completely impossible or difficult to confirm compliance with the requirements when testing a finished product.

6C Certification Scheme
This scheme involves a set of verification measures, including a detailed analysis of production conditions. It is used for homogeneous products and provides for research of the product design, quality system control at the enterprise and product image testing.

7C Certification Scheme
This scheme involves a set of verification measures, including a detailed analysis of production conditions. In the case of using this scheme, initially, under the conditions of an accredited certification center, research (tests) of the type and mandatory analysis of production are carried out.

8C Certification Scheme
This scheme involves a set of verification measures, including a detailed analysis of production conditions. Scheme 8C is applicable for complex products intended for serial and mass production, as well as in the case of planning the release of a large number of product modifications. Also here it is assumed that the quality management system at the enterprise is certified.

9C Certification Scheme
This scheme involves a set of verification measures, including a detailed analysis of production conditions.

Recommended for products, the release of which is carried out in small batches is not constant. Tests under this scheme are not carried out, the certificate is issued on the basis of the analysis of the provided technical documents.

 CUTR  Declaration schemes
1D declaration scheme
Only the manufacturer of the product or his authorized representative acting on the territory of the vehicle and registered in the prescribed manner has the right to register the declaration and implies the declaration on the basis of the manufacturer’s or the applicant’s own evidence.

2D declaration scheme
The manufacturer of the products has the right to register the declaration and implies a declaration on the basis of the manufacturer’s own evidence.

3D Declaration Scheme The declaration is registered at the certification body, either by the manufacturer of the product or by its authorized representative acting on the territory of the vehicle on the basis of research conducted in an accredited laboratory.
4D declaration scheme
To register a declaration for individual products, having tested products in an accredited laboratory, the manufacturer of the products has the right and implies a declaration on the basis of the test report from an accredited laboratory.

5D declaration scheme
This conformity assessment scheme is chosen by the Applicant in those cases when the equipment is complex and is used on especially dangerous objects.


Registration of the declaration in this case is carried out by the certification body. The application is submitted either by the manufacturer of the product itself, or by its authorized representative acting on the territory of the CU on the basis of research in an accredited laboratory.

6D declaration scheme
The declaration is registered by the certification body, or the manufacturer of the product itself, or its authorized representative, when a quality management system is implemented and operational. Tests of product samples must pass in an accredited laboratory.